One approach, three kinds of site
Factories, offices and housing societies use light differently, so each gets its own package. The method is the same for all three: a demo first, and savings math from your own data.
Factories & warehouses
One vendor for lighting, motion sensing and gas/smoke detection, with the energy saving worked out before you buy.
Old high-bay and tube fittings run at full power over empty shop floors and godowns. Failed lights mean dark work areas and more maintenance calls. Safety sensing usually comes from a different vendor, with a different contact for every fault.
What's included
- High-bay LED retrofit, 50–200W, with 8–15 m sensing
- Flood lights 50–200W, plus tube and panel lights where needed
- Motion and occupancy sensors for offices, stores and passages
- Gas and smoke detectors
- An energy savings report for your plant, built from your own site survey
How it works
- Site survey, then a demo fixture on your floor with before/after readings
- Rollout bay by bay, planned around your shifts
Corporate offices
An upgrade your facilities team can plan over a weekend, with energy numbers you can report.
Lights stay on in empty meeting rooms, cabins and floors. Dull or flickering fittings affect the workplace. Management now asks for energy and ESG numbers that facilities teams struggle to produce.
What's included
- LED panel lights: concealed and surface 7–22W (4–8 in), and 2×2 panels 36W/50W, dimmable
- Tube and COB lights where needed
- Occupancy sensors (about 6–8 m, up to 3 lights per sensor) and motion sensors
- A before/after energy summary for your records
How it works
- A demo panel and sensor installed in one room or floor
- Floor-by-floor rollout, planned around your working days
Housing societies
Cut the common-area electricity line in your maintenance bill, with numbers the committee can show residents.
Corridors, staircases, parking and gardens stay lit all night whether or not anyone is there. Their electricity is a fixed line in every month's bill. Gas leaks and smoke in basements and parking are a safety risk that nobody checks until it matters.
Our lights are already installed in residential societies in the region.
What's included
- Smart LED lights for common areas: tube, panel and COB lights indoors, with an inbuilt motion sensor
- Street, garden and bulkhead lights for outdoor and parking areas
- Motion and occupancy sensors where lights should only run when someone is there
- Gas and smoke detectors for basements and parking
How it works
- We install one demo fixture in a corridor or parking area so the committee can see it working
- We can attend your committee meeting to answer questions
- Rollout area by area once the committee is satisfied
No saving figure until we have your data
Every quote lists the assumptions behind the saving: your tariff, the hours each area is lit, the fitting count and wattage, and the expected sensor effect. If an input isn't known yet, the quote says so.
Try the savings estimateWhat we collect at the site survey
- Areas to cover and ceiling heights
- Existing fittings: type, wattage, count, working or failed
- Hours of use, days per year and occupancy pattern
- Electricity tariff from your latest bill
- Gas and smoke risk areas
- Your preferred installation window
See it working at your site
Free demo fixture for factories, offices and societies in Pune, Thane and Mumbai.